TIME
----


.. figure:: ../media/image900.png
   :figwidth: 2.90625in
   :align: center 

**Purpose**

Outputs the model time at every time-step.

**Procedure** 

None

**Parameters** 

None

**Remarks** 

None

**Examples** 

Figure 1 presents an example where the TIME component is used to switch a pump off between 5:00 and 21:00 and on between 21:00 and 5:00 every day. Figure 2 (a & b) shows the output of the MOD and OR component for a simulation duration of 1 week.

Component TAB2 is used to translate logical output to a pumpspeed including start/stop time in 5 s. Figure 3 shows the pump speed.

.. figure:: ../media/image901.png
   :figwidth: 5.21875in
   :align: center 

   Control scheme to operate a pump each day between 21 h and 5 hr

.. figure:: ../media/image902.png
   :figwidth: 2.77083in
   :align: center

   Output of Modulo function

.. figure:: ../media/image903.png
   :figwidth: 2.77083in
   :align: center

   On/Off signal for Pump


.. figure:: ../media/image904.png
   :figwidth: 2.77083in
   :align: center 

   Pump speed

.. include:: substitutions_control.rst